Temple of Gainz Quadsend Review
This product was tested in-house by Michael at The Jungle Gym Reviews.
The Temple of Gainz Quadsend is a premium leg press and hack squat combo machine built for users who want no-compromise range of motion, heavy loadability, and unique electronic resistance integration. If you are looking for an affordable leg press for a budget home gym, this is not it. But if you want the best-feeling, most adjustable combo machine available, the Quadsend was designed to solve the common issues found in other units. They set out to design this machine from the ground up to solve specific issues with combo machines, offering insane range of motion, extra-wide foot plates, customizable band peg mounting points, and the ability to make the machine narrower to suit smaller spaces.
Quick Takeaway
The Quadsend is an expensive, high-end machine that delivers an incredible 37.5-degree angle, massive range of motion, and thoughtful adjustments. It is a buy-it-for-life investment that excels in both leg press and hack squat configurations, though its large footprint and premium price tag mean it is not for everyone. If you want the best feeling, no compromises, and electronic resistance capabilities, that is exactly what this was made for.
Quick Specs
Price: $4,199
Angle: 37.5 degrees
Length: Up to 99 inches (with long weight horn)
Weight Capacity: 1,500 lbs (short horn) / 1,800 lbs (long horn)
Key Features: Adjustable handles, band pegs, Vultra integration, calf raise block
Where to Buy
You can purchase the Temple of Gainz Quadsend at the link below. The discount code “JUNGLEGYM” gives 5% off eligible Temple of Gainz products but explicitly excludes the Quadsend:
My Real-World Experience
I have been daily driving the first production run of the Quadsend, and it is clear that a lot of time, energy, and effort went into its design. At 6'2", I often struggle with range of motion on combo machines, but the Quadsend accommodates my height effortlessly. The linear bearings glide smoothly without any vibration, and the 37.5-degree angle feels noticeably easier on my joints compared to traditional 45-degree machines. I noticed that when we tried it at Home Gym Con last year. I had been testing and reviewing a handful of 45-degree machines, and you definitely feel those on your joints more. With this 37.5-degree angle, I do not. The tradeoff is that the weight perception is slightly less, so you might need to load it a bit heavier, but that same force is much easier on the joints during hack squats and leg presses.
You will not max this machine out. It features a stopper system at the bottom with short and long options using a mag pin. I keep the short one in because I do not typically need the long one unless my knees give out and I need to save my torso. But if you have injuries or prefer a set range of motion that is a bit higher, you can swap that out. The range of motion is absolutely incredible. For fans of deep squats or shorter users, they will not have a problem with range of motion. Even for me, I have a pretty deep range of motion here, and the machine allows for even more depending on torso and body sizes.
On the flip side, the stopper pegs for engaging the weight go all the way up. The tallest of users will find plenty of room. This is also useful when using the bottom frame for calf raises. You get a wide range of about two feet from the top stopper to the bottom stopper.
Adjustability and Footprint
This machine is large, measuring 99 inches long with the standard weight horn. The length is the limiting factor for most spaces. However, Temple of Gainz thought about space: you can swap the 66-inch center weight horn for a 50-inch version, reducing the footprint while still offering about 16.5 inches of loadable length. The frame itself is relatively narrow, about 44 inches wide when the handles are flipped out. If this were in my basement, I would put the short weight horn on, remove the weight plate storage, and I could shove this into a corner pretty easily. The weight capacity for the weight horns in terms of breakage failure is 1,500 pounds for the small one and 1,800 pounds for the big one. This machine is meant to go heavy.
The adjustability is unmatched, with seven backpad angles utilizing a piston assist, and two leg press plate angles to suit any body type. There is a little bit of front-to-back play in the leg press plate when in the upright angle due to the mag pin, which causes it to slightly touch the hack squat pads. It is not something you will feel during use, but for a machine at this price point, some users might notice it. The machine also features knurled aluminum end cap handles that can be adjusted to three different heights. As a taller user with long arms, I would prefer them a bit lower, but they definitely work. I just have to rest my elbows on the back of the pad or put my hands underneath the seat frame.
The handles automatically flip down, which is a really cool feature that saves you from having to unlock them yourself. It does make an aggressive bouncing sound, giving that classic gym equipment feel. The one downside is they are a bit wide to account for the frame, so shorter users might struggle to grab them comfortably on both sides during leg presses.
Hack Squat Mode
Transitioning to hack squat mode is seamless. You can remove the back pad using a mag pin, though I typically leave it on. The shoulder pads have a slight angle, and the width and length feel very comfortable. The smoothness of the guide rods is apparent; you hear the whoosh of the linear bearings, similar to a Smith machine, but feel no vibration. It just glides. The handles down below offer another option if you have shoulder injuries or just prefer a different grip.
They also thought about storage for the back pad. There is a little storage place right on the center middle of the frame. If you leave a little bit of space behind the machine, you can easily store the back pad right on the machine itself.
Voltra Integration
One of the most unique features is the Voltra integration. For an extra cost of $300 for the integration kit (plus the cost of the Voltra unit itself, around $2,200), you can mount a Voltra fixed mount directly to the frame underneath the seat. Because of the pulley system, the Voltra's 200 pounds of electronic resistance acts in a 1-to-2 ratio, feeling like 400 pounds on the Quadsend. This allows you to set specific stopping points for your range of motion and modulate the resistance, adding a completely new dimension to your training. I think it is really cool to see this integration between machines and Voltra, and not in a DIY sense because it is mounted directly to the frame.
Leg Press Sled Attachment
The leg press sled is an optional attachment that allows you to perform a leg press while facing downward. It takes about a minute to set up by removing the hack squat back pad and attaching the sled pieces. While it requires storing the extra pieces and feels a bit DIY during assembly, the movement feels noticeably different and provides a great variation. I appreciate the added functionality for a home gym setting, though you may want to hold off on purchasing it initially due to the extra cost and storage requirements. I put off using this for a bit because the setup added some friction to the workouts, but it is definitely not as big of a deal as I was making it.
Comparisons / Alternatives
If the Quadsend's $4,199 price tag is too high, a value alternative is the Force USA 45-degree leg press hack squat, which costs around $1,900. The Force USA is a solid machine with good durability, but it has a smaller footplate, a lesser range of motion, and is not as robust as the Quadsend. The Quadsend is essentially a commercial machine priced for the high-end home gym market, offering adjustments and features you won't find on budget models.
Tradeoffs
The biggest tradeoff is the price; at $4,199, it is a significant investment. Additionally, the 37.5-degree angle means it takes up a bit more length. The footprint is very long, and while the auto-unlocking handles are a nice touch that give a satisfying clang, they can be a bit wide for shorter users to reach comfortably in leg press mode. Finally, the paint and powder coat on the adjustment points can chip or scratch over time, and some of the rubber end caps can fall out easily. For instance, the paint comes off around the holes when inserting the hack squat pad.
Who Should Buy This
This machine is for the home gym owner who wants the absolute best, no-compromise leg press and hack squat combo. If you value extreme range of motion, smooth linear bearings, joint-friendly angles, and the ability to integrate electronic resistance, the Quadsend is a buy-it-for-life piece.
Who Should Skip It
You should skip this if you are on a tight budget or have limited floor space. If you just need a basic, functional leg press and hack squat, there are much cheaper alternatives that will get the job done.
Common Questions
Can I use bands with the Quadsend?
Yes, the machine includes six band pegs on each side and multiple mounting points on the frame, allowing you to easily set up banded or reverse-band resistance. You can build the resistance so it gets harder at the top, or use an inverse band setup. You can also just take the band pegs off or flip them inside.
How does the calf raise function work?
The machine has specific cutouts for calf raises in both leg press and hack squat modes. The hack squat calf raise is more polished, while the leg press calf raise works but lacks grip tape and is more of an afterthought. Do not attempt calf raises on the unsupported sheet metal area. With size 12 shoes, my toes are fully on the hack squat calf raise block.
Does it come with grip tape?
The grip tape comes standard on all future orders, but you do have to apply it yourself over the diamond footplate. I highly suggest putting it on, as it feels and looks premium.
Final Verdict
The Temple of Gainz Quadsend is an exceptional, premium machine that delivers on its promises of massive range of motion and superior adjustability. While the price is steep, it is a top-tier option for those who want a commercial-quality combo machine in their home gym. You can check it out using our affiliate link. (Remember, the code JUNGLEGYM does not apply to this product).
The Jungle Gym Reviews may earn a commission from purchases made through our links, which helps us continue to test and review equipment.
